initial commit

bin/ash

@@ -0,0 +1 @@
+busybox

bin/board_detect

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+[ -d "/etc/board.d/" -a ! -f "/etc/board.json" ] && {
+	for a in `ls /etc/board.d/*`; do
+		[ -x $a ] || continue;
+		$(. $a)
+	done
+}
+
+[ -f "/etc/board.json" ] || return 1
+[ -f "/etc/config/network" ] || {
+	touch /etc/config/network
+	/bin/config_generate
+}

bin/cat

@@ -0,0 +1 @@
+busybox

bin/chgrp

@@ -0,0 +1 @@
+busybox

bin/chmod

@@ -0,0 +1 @@
+busybox

bin/chown

@@ -0,0 +1 @@
+busybox

bin/config_generate

@@ -0,0 +1,172 @@
+#!/bin/sh
+
+CFG=/etc/board.json
+
+. /usr/share/libubox/jshn.sh
+
+[ -f $CFG ] || exit 1
+
+generate_static_network() {
+	uci -q batch <<EOF
+delete network.loopback
+set network.loopback='interface'
+set network.loopback.ifname='lo'
+set network.loopback.proto='static'
+set network.loopback.ipaddr='127.0.0.1'
+set network.loopback.netmask='255.0.0.0'
+delete network.globals
+set network.globals='globals'
+set network.globals.ula_prefix='auto'
+EOF
+}
+
+next_vlan=3
+generate_network() {
+	local vlan
+
+	json_select network
+	json_select $1
+	json_get_vars ifname create_vlan macaddr
+	json_select ..
+	json_select ..
+
+	[ -n "$ifname" ] || return
+	[ "$create_vlan" -eq 1 ] && case $1 in
+	lan) vlan=1;;
+	wan) vlan=2;;
+	*)
+		vlan=$next_vlan
+		next_vlan=$((next_vlan + 1))
+		;;
+	esac
+	[ -n "$vlan" ] && ifname=${ifname}.${vlan}
+	uci -q batch <<EOF
+delete network.$1
+set network.$1='interface'
+set network.$1.ifname='$ifname'
+set network.$1.force_link=1
+set network.$1.proto='none'
+set network.$1.macaddr='$macaddr'
+EOF
+
+	case $1 in
+	lan) uci -q batch <<EOF
+set network.$1.type='bridge'
+set network.$1.proto='static'
+set network.$1.ipaddr='192.168.1.1'
+set network.$1.netmask='255.255.255.0'
+set network.$1.ip6assign='60'
+EOF
+		;;
+	wan) uci -q batch <<EOF
+set network.$1.proto='dhcp'
+delete network.wan6
+set network.wan6='interface'
+set network.wan6.ifname='$ifname'
+set network.wan6.proto='dhcpv6'
+EOF
+		;;
+	esac
+}
+
+generate_switch_vlan() {
+	local device=$1
+	local vlan=$2
+	local cpu_port=$3
+
+	case $vlan in
+	lan)	vlan=1;;
+	wan)	vlan=2;;
+	*)	vlan=${vlan##vlan};;
+	esac
+
+	json_select vlans
+	json_select $2
+	json_get_values ports
+	json_select ..
+	json_select ..
+
+	uci -q batch <<EOF
+add network switch_vlan
+set network.@switch_vlan[-1].device='$device'
+set network.@switch_vlan[-1].vlan='$vlan'
+set network.@switch_vlan[-1].ports='$ports ${cpu_port}t'
+EOF
+}
+
+generate_switch() {
+	local key=$1
+	local vlans
+
+	json_select switch
+	json_select $key
+	json_get_vars enable reset blinkrate cpu_port
+
+	uci -q batch <<EOF
+add network switch
+set network.@switch[-1].name='$key'
+set network.@switch[-1].reset='$reset'
+set network.@switch[-1].enable_vlan='$enable'
+set network.@switch[-1].blinkrate='$blinkrate'
+EOF
+	[ -n "$cpu_port" ] && {
+		json_get_keys vlans vlans
+		for vlan in $vlans; do generate_switch_vlan $1 $vlan $cpu_port; done
+	}
+	json_select ..
+	json_select ..
+}
+
+generate_led() {
+	local key=$1
+	local cfg="led_$key"
+
+	json_select led
+	json_select $key
+	json_get_vars name sysfs type trigger device interface default
+	json_select ..
+	json_select ..
+
+	uci -q batch <<EOF
+delete system.$cfg
+set system.$cfg='led'
+set system.$cfg.name='$name'
+set system.$cfg.sysfs='$sysfs'
+set system.$cfg.dev='$device'
+set system.$cfg.trigger='$trigger'
+set system.$cfg.port_mask='$port_mask'
+set system.$cfg.default='$default'
+EOF
+	case $type in
+	netdev)
+		uci -q batch <<EOF
+set system.$cfg.trigger='netdev'
+set system.$cfg.mode='link tx rx'
+EOF
+	;;
+
+	usb)
+		uci -q batch <<EOF
+set system.$cfg.trigger='usbdev'
+set system.$cfg.interval='50'
+EOF
+	;;
+
+	esac
+}
+
+json_init
+json_load "$(cat ${CFG})"
+
+generate_static_network
+
+json_get_keys keys network
+for key in $keys; do generate_network $key; done
+
+json_get_keys keys switch
+for key in $keys; do generate_switch $key; done
+
+json_get_keys keys led
+for key in $keys; do generate_led $key; done
+
+uci commit

bin/cp

@@ -0,0 +1 @@
+busybox

bin/date

@@ -0,0 +1 @@
+busybox

bin/dd

@@ -0,0 +1 @@
+busybox

bin/df

@@ -0,0 +1 @@
+busybox

bin/dmesg

@@ -0,0 +1 @@
+busybox

bin/echo

@@ -0,0 +1 @@
+busybox

bin/egrep

@@ -0,0 +1 @@
+busybox

bin/false

@@ -0,0 +1 @@
+busybox

bin/fgrep

@@ -0,0 +1 @@
+busybox

bin/fsync

@@ -0,0 +1 @@
+busybox

bin/grep

@@ -0,0 +1 @@
+busybox

bin/gunzip

@@ -0,0 +1 @@
+busybox

bin/gzip

@@ -0,0 +1 @@
+busybox

bin/ipcalc.sh

@@ -0,0 +1,71 @@
+#!/bin/sh
+
+awk -f - $* <<EOF
+function bitcount(c) {
+	c=and(rshift(c, 1),0x55555555)+and(c,0x55555555)
+	c=and(rshift(c, 2),0x33333333)+and(c,0x33333333)
+	c=and(rshift(c, 4),0x0f0f0f0f)+and(c,0x0f0f0f0f)
+	c=and(rshift(c, 8),0x00ff00ff)+and(c,0x00ff00ff)
+	c=and(rshift(c,16),0x0000ffff)+and(c,0x0000ffff)
+	return c
+}
+
+function ip2int(ip) {
+	for (ret=0,n=split(ip,a,"\."),x=1;x<=n;x++) ret=or(lshift(ret,8),a[x])
+	return ret
+}
+
+function int2ip(ip,ret,x) {
+	ret=and(ip,255)
+	ip=rshift(ip,8)
+	for(;x<3;ret=and(ip,255)"."ret,ip=rshift(ip,8),x++);
+	return ret
+}
+
+function compl32(v) {
+	ret=xor(v, 0xffffffff)
+	return ret
+}
+
+BEGIN {
+	slpos=index(ARGV[1],"/")
+	if (slpos == 0) {
+		ipaddr=ip2int(ARGV[1])
+		dotpos=index(ARGV[2],".")
+		if (dotpos == 0)
+			netmask=compl32(2**(32-int(ARGV[2]))-1)
+		else
+			netmask=ip2int(ARGV[2])
+	} else {
+		ipaddr=ip2int(substr(ARGV[1],0,slpos-1))
+		netmask=compl32(2**(32-int(substr(ARGV[1],slpos+1)))-1)
+		ARGV[4]=ARGV[3]
+		ARGV[3]=ARGV[2]
+	}
+
+	network=and(ipaddr,netmask)
+	broadcast=or(network,compl32(netmask))
+
+	start=or(network,and(ip2int(ARGV[3]),compl32(netmask)))
+	limit=network+1
+	if (start<limit) start=limit
+
+	end=start+ARGV[4]
+	limit=or(network,compl32(netmask))-1
+	if (end>limit) end=limit
+
+	print "IP="int2ip(ipaddr)
+	print "NETMASK="int2ip(netmask)
+	print "BROADCAST="int2ip(broadcast)
+	print "NETWORK="int2ip(network)
+	print "PREFIX="32-bitcount(compl32(netmask))
+
+	# range calculations:
+	# ipcalc <ip> <netmask> <start> <num>
+
+	if (ARGC > 3) {
+		print "START="int2ip(start)
+		print "END="int2ip(end)
+	}
+}
+EOF

bin/kill

@@ -0,0 +1 @@
+busybox

bin/ln

@@ -0,0 +1 @@
+busybox

bin/lock

@@ -0,0 +1 @@
+busybox

bin/login.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2006-2011 OpenWrt.org
+
+if ( ! grep -qsE '^root:[!x]?:' /etc/shadow || \
+     ! grep -qsE '^root:[!x]?:' /etc/passwd ) && \
+   [ -z "$FAILSAFE" ]
+then
+	echo "Login failed."
+	exit 0
+else
+cat << EOF
+ === IMPORTANT ============================
+  Use 'passwd' to set your login password!
+ ------------------------------------------
+EOF
+fi
+
+exec /bin/ash --login

bin/ls

@@ -0,0 +1 @@
+busybox

bin/mkdir

@@ -0,0 +1 @@
+busybox

bin/mknod

@@ -0,0 +1 @@
+busybox

bin/mktemp

@@ -0,0 +1 @@
+busybox

bin/mount

@@ -0,0 +1 @@
+busybox

bin/mv

@@ -0,0 +1 @@
+busybox

bin/net-snmp-config

@@ -0,0 +1,700 @@
+#!/bin/sh
+#
+# $Id$
+#
+# this shell script is designed to merely dump the configuration
+# information about how the net-snmp package was compiled.  The
+# information is particularly useful for applications that need to
+# link against the net-snmp libraries and hence must know about any
+# other libraries that must be linked in as well.
+
+check_build_dir()
+{
+      build_dir=$1
+
+      if test "x$build_dir" = "x" ; then
+         echo "You must specify a build directory."
+         exit 1
+      fi
+      # is it the src dir?
+      if test -f $build_dir/net-snmp-config.in ; then
+         return
+      fi
+      # make sure we can find build dir
+      if test ! -d $build_dir/snmplib/.libs ; then
+         echo "$build_dir does not appear to be a build directory."
+         exit 1
+      fi
+}
+
+# usage: index n arguments
+# effect: returns the (n+1)th argument
+index()
+{
+    eval echo \$`expr $1 + 1`
+}
+
+# usage: count arguments
+# effect: returns the number of arguments
+count()
+{
+    echo $#
+}
+
+prefix=/usr
+exec_prefix=/usr
+includedir=${prefix}/include
+libdir=${exec_prefix}/lib
+datarootdir=${prefix}/share
+NSC_LDFLAGS="-L/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/usr/lib -L/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/lib "
+
+NSC_LIBS="-lm "
+NSC_LNETSNMPLIBS=""
+NSC_LAGENTLIBS=" "
+NSC_LMIBLIBS="-ldl "
+
+NSC_INCLUDEDIR=${includedir}
+NSC_LIBDIR=-L${libdir}
+
+NSC_SNMPLIBS="-lnetsnmp ${NSC_LNETSNMPLIBS}"
+NSC_SUBAGENTLIBS="-lnetsnmpagent ${NSC_LAGENTLIBS} ${NSC_SNMPLIBS}"
+NSC_AGENTLIBS="-lnetsnmpmibs ${NSC_LMIBLIBS} ${NSC_SUBAGENTLIBS}"
+
+NSC_PREFIX=$prefix
+NSC_EXEC_PREFIX=$exec_prefix
+NSC_SRCDIR=.
+NSC_INCDIR=${NSC_PREFIX}/include
+
+NSC_BASE_SNMP_LIBS="-lnetsnmp"
+NSC_BASE_SUBAGENT_LIBS="-lnetsnmpagent ${NSC_BASE_SNMP_LIBS}"
+NSC_BASE_AGENT_LIBS="-lnetsnmpmibs ${NSC_BASE_SUBAGENT_LIBS}"
+
+NSC_SRC_LIBDIRS="agent/.libs snmplib/.libs"
+NSC_SRC_LIBDEPS="agent/.libs/libnetsnmpmibs.a agent/.libs/libnetsnmpagent.a snmplib/.libs/libnetsnmp.a"
+
+if test "x$NSC_SRCDIR" = "x." ; then
+   NSC_SRCDIR="NET-SNMP-SOURCE-DIR"
+fi
+
+if test "x$1" = "x"; then
+  usage="yes"
+else
+  while test "x$done" = "x" -a "x$1" != "x" -a "x$usage" != "xyes"; do
+  case "$1" in
+    -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+    *) optarg= ;;
+  esac
+
+  unset shifted
+  case $1 in
+    --prefix=*)
+      prefix=$optarg
+      NSC_PREFIX=${prefix}
+      NSC_INCLUDEDIR=${prefix}/include
+      NSC_LIBDIR=-L${prefix}/lib
+      ;;
+
+    --exec-prefix=*)
+      exec_prefix=$optarg
+      NSC_EXEC_PREFIX=${exec_prefix}
+      NSC_LIBDIR=-L${exec_prefix}/lib
+      ;;
+
+    --debug-tokens|--deb*|--dbg*)
+      echo "find $NSC_SRCDIR -name \"*.c\" -print | xargs grep DEBUGMSGT | grep \\\" | cut -f 2 -d\\\" | sort -u"
+      if test "x$NSC_SRCDIR" != "xNET-SNMP-SOURCE-DIR" ; then
+        /usr/bin/find $NSC_SRCDIR -name "*.c" -print | xargs grep DEBUGMSGT | grep \" | cut -f 2 -d\" | sort -u
+      fi
+      ;;
+    --indent-options|--in*)
+      echo "indent -orig -nbc -bap -nut -nfca `(cd $NSC_INCDIR/net-snmp; perl -n -e 'print "-T $1 " if (/}\s*(netsnmp_\w+)\s*;/);' */*.h)`"
+      ;;
+    --configure-options|--con*)
+      echo " '--target=mips-openwrt-linux' '--host=mips-openwrt-linux' '--build=x86_64-linux-gnu' '--program-prefix=' '--program-suffix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--libexecdir=/usr/lib' '--sysconfdir=/etc' '--datadir=/usr/share' '--localstatedir=/var' '--mandir=/usr/man' '--infodir=/usr/info' '--disable-nls' '--enable-mfd-rewrites' '--enable-shared' '--enable-static' '--with-endianness=big' '--with-logfile=/var/log/snmpd.log' '--with-persistent-directory=/usr/lib/snmp/' '--with-default-snmp-version=1' '--with-sys-contact=root@localhost' '--with-sys-location=Unknown' '--enable-applications' '--disable-debugging' '--disable-manuals' '--disable-scripts' '--with-out-mib-modules=agent_mibs agentx disman/event disman/schedule hardware host if-mib mibII notification notification-log-mib snmpv3mibs target tcp-mib ucd_snmp udp-mib utilities ' '--with-mib-modules=host/hr_device host/hr_disk host/hr_filesys host/hr_network host/hr_partition host/hr_proc host/hr_storage host/hr_system ieee802dot11 if-mib/ifXTable mibII/at mibII/icmp mibII/ifTable mibII/ip mibII/snmp_mib mibII/sysORTable mibII/system_mib mibII/tcp mibII/udp mibII/vacm_context mibII/vacm_vars snmpv3/snmpEngine snmpv3/snmpMPDStats snmpv3/usmConf snmpv3/usmStats snmpv3/usmUser tunnel ucd-snmp/disk ucd-snmp/dlmod ucd-snmp/extensible ucd-snmp/loadave ucd-snmp/memory ucd-snmp/pass ucd-snmp/proc ucd-snmp/vmstat util_funcs utilities/execute ' '--with-out-transports=TCP TCPIPv6 Unix' '--with-transports=Callback UDP UDPIPv6' '--with-openssl=internal' '--without-libwrap' '--without-rpm' '--without-zlib' '--without-nl' '--enable-ipv6' 'build_alias=x86_64-linux-gnu' 'host_alias=mips-openwrt-linux' 'target_alias=mips-openwrt-linux' 'CC=mips-openwrt-linux-uclibc-gcc' 'CFLAGS=-Os -pipe -mno-branch-likely -mips32r2 -mtune=74kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -fpic ' 'LDFLAGS=-L/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/usr/lib -L/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/lib -L/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/lib ' 'CPPFLAGS=-I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/include '"
+      ;;
+    --snmpd-module-list|--mod*)
+echo  host/hr_device host/hr_disk host/hr_filesys host/hr_network host/hr_partition host/hr_proc host/hr_storage host/hr_system ieee802dot11 mibII/at mibII/icmp mibII/ip mibII/snmp_mib mibII/sysORTable mibII/system_mib mibII/tcp mibII/udp mibII/vacm_context mibII/vacm_vars snmpv3/snmpEngine snmpv3/snmpMPDStats snmpv3/usmConf snmpv3/usmStats snmpv3/usmUser ucd-snmp/disk ucd-snmp/dlmod ucd-snmp/extensible ucd-snmp/loadave ucd-snmp/memory ucd-snmp/pass ucd-snmp/proc ucd-snmp/vmstat util_funcs utilities/execute if-mib/ifXTable/ifXTable mibII/kernel_linux mibII/ipAddr mibII/var_route mibII/route_write mibII/updates mibII/tcpTable mibII/udpTable util_funcs/header_generic mibII/vacm_conf tunnel/tunnel util_funcs/header_simple_table ucd-snmp/pass_common hardware/cpu/cpu hardware/cpu/cpu_linux hardware/memory/hw_mem hardware/memory/memory_linux if-mib/data_access/interface if-mib/ifTable/ifTable_interface if-mib/ifTable/ifTable_data_access if-mib/ifTable/ifTable if-mib/ifXTable/ifXTable_interface if-mib/ifXTable/ifXTable_data_access if-mib/data_access/interface_linux if-mib/data_access/interface_ioctl ip-mib/data_access/ipaddress_common ip-mib/data_access/ipaddress_linux ip-mib/data_access/ipaddress_ioctl
+      ;;
+    --default-mibs|--mibs|--MIBS)
+      echo :SNMPv2-MIB:IF-MIB:IP-MIB:TCP-MIB:UDP-MIB:HOST-RESOURCES-MIB:NOTIFICATION-LOG-MIB:DISMAN-EVENT-MIB:DISMAN-SCHEDULE-MIB:SNMP-VIEW-BASED-ACM-MIB:SNMP-COMMUNITY-MIB:SNMP-FRAMEWORK-MIB:SNMP-MPD-MIB:SNMP-USER-BASED-SM-MIB:TUNNEL-MIB:IPV6-FLOW-LABEL-MIB:UCD-DLMOD-MIB:NET-SNMP-PASS-MIB
+      ;;
+    --default-mibdirs|--mibdirs|--MIBDIRS)
+      echo $HOME/.snmp/mibs:/usr/share/snmp/mibs
+      ;;
+    --env-separator)
+      echo ":"
+      ;;
+    --exeext)
+      echo ""
+      ;;
+    --snmpconfpath|--SNMPCONFPATH)
+      echo "/etc/snmp:/usr/share/snmp:/usr/lib/snmp:$HOME/.snmp:/usr/lib/snmp/"
+      ;;
+    --persistent-directory|--persistent-dir)
+      echo /usr/lib/snmp/
+      ;;
+    --perlprog|--perl)
+      echo /mnt/src/qsdk/staging_dir/host/bin/perl
+      ;;
+    #################################################### compile
+    --base-cflags)
+      echo -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -Os -pipe -mno-branch-likely -mips32r2 -mtune=74kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -fpic  -Ulinux -Dlinux=linux -I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/include  -I${NSC_INCLUDEDIR}
+      ;;
+    --cflags|--cf*)
+      echo -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -Os -pipe -mno-branch-likely -mips32r2 -mtune=74kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -fpic  -Ulinux -Dlinux=linux  -I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/target-mips_74kc_uClibc-1.0.14/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/usr/include -I/mnt/src/qsdk/staging_dir/toolchain-mips_74kc_gcc-4.8-linaro_uClibc-1.0.14/include  -I. -I${NSC_INCLUDEDIR}
+      ;;
+    --srcdir)
+      echo $NSC_SRCDIR
+      ;;
+    #################################################### linking
+    --libdir|--lib-dir)
+      echo $NSC_LIBDIR
+      ;;
+    --ldflags|--ld*)
+      echo $NSC_LDFLAGS
+      ;;
+    --build-lib-dirs)
+      shift
+      build_dir=$1
+      check_build_dir $build_dir
+      for dir in $NSC_SRC_LIBDIRS; do
+          result="$result -L$build_dir/$dir"
+      done
+      echo $result
+      ;;
+    --build-lib-deps)
+      shift
+      build_dir=$1
+      check_build_dir $build_dir
+      for dir in $NSC_SRC_LIBDEPS; do
+          result="$result $build_dir/$dir"
+      done
+      echo $result
+      ;;
+    --build-includes)
+      shift
+      build_dir=$1
+      check_build_dir $build_dir
+      result="-I$build_dir/include"
+      if test "$build_dir" != "$NSC_SRCDIR" -a "$NSC_SRCDIR" != "NET-SNMP-SOURCE-DIR"
+      then
+          result="$result -I$NSC_SRCDIR/include"
+      fi
+      echo $result
+      ;;
+    --build-command)
+      echo "mips-openwrt-linux-uclibc-gcc -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -Os -pipe -mno-branch-likely -mips32r2 -mtune=74kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -fpic  -Ulinux -Dlinux=linux "
+      ;;
+    #################################################### client lib
+    --libs)
+      # use this one == --netsnmp-libs + --external-libs
+      echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_SNMPLIBS $NSC_LIBS
+      ;;
+    --netsnmp-libs)
+      echo $NSC_LIBDIR $NSC_BASE_SNMP_LIBS
+      ;;
+    --external-libs)
+      echo $NSC_LDFLAGS $NSC_LNETSNMPLIBS $NSC_LIBS 
+      ;;
+    #################################################### agent lib
+    --base-agent-libs)
+      echo $NSC_BASE_AGENT_LIBS
+      ;;
+    --base-subagent-libs)
+      echo $NSC_BASE_SUBAGENT_LIBS
+      ;;
+    --agent-libs)
+      # use this one == --netsnmp-agent-libs + --external-libs
+      echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_AGENTLIBS $NSC_LIBS
+      ;;
+    --netsnmp-agent-libs)
+      echo $NSC_LIBDIR $NSC_BASE_AGENT_LIBS
+      ;;
+    --external-agent-libs)
+      echo $NSC_LDFLAGS $NSC_LMIBLIBS $NSC_LAGENTLIBS $NSC_LNETSNMPLIBS $NSC_LIBS
+      ;;
+    ####################################################
+    --version|--ver*)
+      echo 5.7.3
+      ;;
+    --help)
+      usage="yes"
+      ;;
+    --prefix|--pre*)
+      echo $NSC_PREFIX
+      ;;
+    --exec-prefix)
+      echo $NSC_EXEC_PREFIX
+      ;;
+    ####################################################
+    --create-snmpv3-user)
+      done=1
+      shift
+      net-snmp-create-v3-user $*
+      exit $?
+      ;;
+
+    ####################################################
+    --compile-subagent)
+      shift
+      shifted=1
+      while test "x$done" = "x" -a "x$1" != "x" ; do
+	case $1 in
+            --norm)
+	        norm=1
+	        shift
+		;;
+            --cflags)
+	        shift
+	        if test "x$1" = "x" ; then
+	            echo "You must specify the extra cflags"
+	            exit 1
+	        fi
+	        cflags=$1
+	        echo "setting extra cflags: $cflags"
+	        shift
+		;;
+            --ldflags)
+	        shift
+	        if test "x$1" = "x" ; then
+	            echo "You must specify the extra ldflags"
+	            exit 1
+	        fi
+	        ldflags=$1
+	        echo "setting extra ldflags: $ldflags"
+	        shift
+		;;
+ 	    --*)
+		echo "unknown suboption to --compile-subagent: $1"
+		exit 1
+		;;
+	    *)
+                if test "x$outname" = "x"; then
+                  outname=$1
+                  shift
+                else
+	          done=1
+                fi
+		;;
+	esac
+      done
+      tmpfile=netsnmptmp.$$.c
+      if test -f $tmpfile; then
+	echo "Ack.  Can't create $tmpfile: already exists"
+	exit 1
+      fi
+      echo "generating the temporary code file: $tmpfile"
+      rm -f $tmpfile
+      cat > $tmpfile <<EOF
+/* generated from net-snmp-config */
+#include <net-snmp/net-snmp-config.h>
+#ifdef HAVE_SIGNAL
+#include <signal.h>
+#endif /* HAVE_SIGNAL */
+#include <net-snmp/net-snmp-includes.h>
+#include <net-snmp/agent/net-snmp-agent-includes.h>
+EOF
+
+    # If we were only given a single filename
+    # (and no explicit output name)
+    # then use that as the base of the output name
+    #
+    # If we weren't even given that, then bomb out
+    if test "x$1" = "x"; then
+      if test "x$outname" = "x"; then
+        echo "No MIB module codefile specified"
+        rm -f $tmpfile
+        exit 1
+      else
+        cfiles=$outname
+        outname=`basename $cfiles | sed 's/\.[co]$//'`
+        if test -f $outname.h; then
+          if grep "init_$outname" $outname.h; then
+            echo "  #include \"$outname.h\"" >> $tmpfile
+          fi
+        fi
+      fi
+    fi
+
+    # add include files
+    while test "$1" != ""; do
+      cfiles="$cfiles $1"
+      name=`basename $1 | sed 's/\.[co]$//'`
+      if test -f $name.h; then
+        if grep "init_$name" $name.h; then
+          echo "  #include \"$name.h\"" >> $tmpfile
+        fi
+      fi
+      shift
+    done
+
+      cat >> $tmpfile <<EOF
+const char *app_name = "$outname";
+static int reconfig = 0;
+
+extern int netsnmp_running;
+
+#ifdef __GNUC__
+#define UNUSED __attribute__((unused))
+#else
+#define UNUSED
+#endif
+
+RETSIGTYPE
+stop_server(UNUSED int a) {
+    netsnmp_running = 0;
+}
+
+#ifdef SIGHUP
+RETSIGTYPE
+hup_handler(int sig)
+{
+    reconfig = 1;
+    signal(SIGHUP, hup_handler);
+}
+#endif
+
+static void
+usage(const char *prog)
+{
+    fprintf(stderr,
+            "USAGE: %s [OPTIONS]\n"
+            "\n"
+            "OPTIONS:\n", prog);
+
+    fprintf(stderr,
+            "  -d\t\t\tdump all traffic\n"
+            "  -D TOKEN[,...]\tturn on debugging output for the specified "
+            "TOKENs\n"
+            "\t\t\t   (ALL gives extremely verbose debugging output)\n"
+            "  -f\t\t\tDo not fork() from the calling shell.\n"
+            "  -h\t\t\tdisplay this help message\n"
+            "  -H\t\t\tdisplay a list of configuration file directives\n"
+            "  -L LOGOPTS\t\tToggle various defaults controlling logging:\n");
+    snmp_log_options_usage("\t\t\t  ", stderr);
+#ifndef DISABLE_MIB_LOADING
+    fprintf(stderr,
+            "  -m MIB[" ENV_SEPARATOR "...]\t\tload given list of MIBs (ALL loads "
+            "everything)\n"
+            "  -M DIR[" ENV_SEPARATOR "...]\t\tlook in given list of directories for MIBs\n");
+#endif /* DISABLE_MIB_LOADING */
+#ifndef DISABLE_MIB_LOADING
+    fprintf(stderr,
+            "  -P MIBOPTS\t\tToggle various defaults controlling mib "
+            "parsing:\n");
+    snmp_mib_toggle_options_usage("\t\t\t  ", stderr);
+#endif /* DISABLE_MIB_LOADING */
+    fprintf(stderr,
+            "  -v\t\t\tdisplay package version number\n"
+            "  -x TRANSPORT\tconnect to master agent using TRANSPORT\n");
+    exit(1);
+}
+
+static void
+version(void)
+{
+    fprintf(stderr, "NET-SNMP version: %s\n", netsnmp_get_version());
+    exit(0);
+}
+
+int
+main (int argc, char **argv)
+{
+  int arg;
+  char* cp = NULL;
+  int dont_fork = 0, do_help = 0;
+
+  while ((arg = getopt(argc, argv, "dD:fhHL:"
+#ifndef DISABLE_MIB_LOADING
+                       "m:M:"
+#endif /* DISABLE_MIB_LOADING */
+                       "n:"
+#ifndef DISABLE_MIB_LOADING
+                       "P:"
+#endif /* DISABLE_MIB_LOADING */
+                       "vx:")) != EOF) {
+    switch (arg) {
+    case 'd':
+      netsnmp_ds_set_boolean(NETSNMP_DS_LIBRARY_ID,
+                             NETSNMP_DS_LIB_DUMP_PACKET, 1);
+      break;
+
+    case 'D':
+      debug_register_tokens(optarg);
+      snmp_set_do_debugging(1);
+      break;
+
+    case 'f':
+      dont_fork = 1;
+      break;
+
+    case 'h':
+      usage(argv[0]);
+      break;
+
+    case 'H':
+      do_help = 1;
+      break;
+
+    case 'L':
+      if (snmp_log_options(optarg, argc, argv) < 0) {
+        exit(1);
+      }
+      break;
+
+#ifndef DISABLE_MIB_LOADING
+    case 'm':
+      if (optarg != NULL) {
+        setenv("MIBS", optarg, 1);
+      } else {
+        usage(argv[0]);
+      }
+      break;
+
+    case 'M':
+      if (optarg != NULL) {
+        setenv("MIBDIRS", optarg, 1);
+      } else {
+        usage(argv[0]);
+      }
+      break;
+#endif /* DISABLE_MIB_LOADING */
+
+    case 'n':
+      if (optarg != NULL) {
+        app_name = optarg;
+        netsnmp_ds_set_string(NETSNMP_DS_LIBRARY_ID,
+                              NETSNMP_DS_LIB_APPTYPE, app_name);
+      } else {
+        usage(argv[0]);
+      }
+      break;
+
+#ifndef DISABLE_MIB_LOADING
+    case 'P':
+      cp = snmp_mib_toggle_options(optarg);
+      if (cp != NULL) {
+        fprintf(stderr, "Unknown parser option to -P: %c.\n", *cp);
+        usage(argv[0]);
+      }
+      break;
+#endif /* DISABLE_MIB_LOADING */
+
+    case 'v':
+      version();
+      break;
+
+    case 'x':
+      if (optarg != NULL) {
+        netsnmp_ds_set_string(NETSNMP_DS_APPLICATION_ID,
+                              NETSNMP_DS_AGENT_X_SOCKET, optarg);
+      } else {
+        usage(argv[0]);
+      }
+      break;
+
+    default:
+      fprintf(stderr, "invalid option: -%c\n", arg);
+      usage(argv[0]);
+      break;
+    }
+  }
+
+  if (do_help) {
+    netsnmp_ds_set_boolean(NETSNMP_DS_APPLICATION_ID,
+                           NETSNMP_DS_AGENT_NO_ROOT_ACCESS, 1);
+  } else {
+    /* we are a subagent */
+    netsnmp_ds_set_boolean(NETSNMP_DS_APPLICATION_ID,
+                           NETSNMP_DS_AGENT_ROLE, 1);
+
+    if (!dont_fork) {
+      if (netsnmp_daemonize(1, snmp_stderrlog_status()) != 0)
+        exit(1);
+    }
+
+    /* initialize tcpip, if necessary */
+    SOCK_STARTUP;
+  }
+
+  /* initialize the agent library */
+  init_agent(app_name);
+
+  /* initialize your mib code here */
+EOF
+
+    # add init routines
+    for i in $cfiles ; do
+      name=`basename $i | sed 's/\.[co]$//'`
+      echo checking for init_$name in $i
+      if grep "init_$name" $i ; then
+        echo "  init_${name}();" >> $tmpfile
+      fi
+    done
+
+    # handle the main loop
+    cat >> $tmpfile <<EOF
+
+  /* $outname will be used to read $outname.conf files. */
+  init_snmp("$outname");
+
+  if (do_help) {
+    fprintf(stderr, "Configuration directives understood:\n");
+    read_config_print_usage("  ");
+    exit(0);
+  }
+
+  /* In case we received a request to stop (kill -TERM or kill -INT) */
+  netsnmp_running = 1;
+#ifdef SIGTERM
+  signal(SIGTERM, stop_server);
+#endif
+#ifdef SIGINT
+  signal(SIGINT, stop_server);
+#endif
+#ifdef SIGHUP
+  signal(SIGHUP, hup_handler);
+#endif
+
+  /* main loop here... */
+  while(netsnmp_running) {
+    if (reconfig) {
+      free_config();
+      read_configs();
+      reconfig = 0;
+    }
+    agent_check_and_process(1);
+  }
+
+  /* at shutdown time */
+  snmp_shutdown(app_name);
+
+  /* deinitialize your mib code here */
+EOF
+
+    # add shutdown routines
+
+    i=`count $cfiles`
+    while [ $i -gt 0 ] ; do
+      fullname=`index $i $cfiles`
+      name=`basename $fullname | sed 's/\.[co]$//'`
+      echo checking for shutdown_$name in $fullname
+      if grep "shutdown_$name" $fullname ; then
+        echo "  shutdown_${name}();" >> $tmpfile
+      fi
+      i=`expr $i - 1`
+    done
+
+    # finish file
+    cat >> $tmpfile <<EOF
+
+  /* shutdown the agent library */
+  shutdown_agent();
+  SOCK_CLEANUP;
+  exit(0);
+}
+EOF
+      if test "$?" != 0 -o ! -f "$tmpfile" ; then
+        echo "Ack.  Can't create $tmpfile."
+	exit 1
+      fi
+      cmd="mips-openwrt-linux-uclibc-gcc $cflags -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -Os -pipe -mno-branch-likely -mips32r2 -mtune=74kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -fpic  -Ulinux -Dlinux=linux  -I. -I${NSC_INCLUDEDIR} -o $outname $tmpfile $cfiles $NSC_LDFLAGS $NSC_LIBDIR $NSC_BASE_AGENT_LIBS $NSC_AGENTLIBS $ldflags"
+      echo "running: $cmd"
+      `$cmd`
+      if test "x$norm" != "x1" ; then
+        echo "removing the temporary code file: $tmpfile"
+        rm -f $tmpfile
+      else
+        echo "leaving the temporary code file: $tmpfile"
+      fi
+      if test -f $outname ; then
+        echo "subagent program $outname created"
+      fi
+      ;;
+
+    *)
+      echo "unknown option $1"
+      usage="yes"
+      ;;
+  esac
+  if [ "x$shifted" = "x" ] ; then
+      shift
+  fi
+  done
+fi
+
+if test "x$usage" = "xyes"; then
+  echo ""
+  echo "Usage:"
+  echo "  net-snmp-config [--cflags] [--agent-libs] [--libs] [--version]"
+  echo "                  ... [see below for complete flag list]"
+  echo ""
+  echo "    --version         displays the net-snmp version number"
+  echo "    --indent-options  displays the indent options from the Coding Style"
+  echo "    --debug-tokens    displays a example command line to search to source"
+  echo "                      code for a list of available debug tokens"
+  echo ""
+  echo "  SNMP Setup commands:"
+  echo ""
+  echo "    --create-snmpv3-user creates a SNMPv3 user in Net-SNMP config file."
+  echo "                         See net-snmp-create-v3-user --help for list of"
+  echo "                         accepted options."
+  echo ""
+  echo "  These options produce the various compilation flags needed when"
+  echo "  building external SNMP applications:"
+  echo ""
+  echo "    --base-cflags     lists additional compilation flags needed"
+  echo "    --cflags          lists additional compilation flags needed"
+  echo "                      (includes -I. and extra developer warning flags)"
+  echo ""
+  echo "  These options produce the various link flags needed when"
+  echo "  building external SNMP applications:"
+  echo ""
+  echo "    --libs            lists libraries needed for building applications"
+  echo "    --agent-libs      lists libraries needed for building subagents"
+  echo ""
+  echo "  These options produce various link flags broken down into parts."
+  echo "  (Most of the time the simple options above should be used.)"
+  echo ""
+  echo "    --libdir              path to netsnmp libraries"
+  echo ""
+  echo "    --base-agent-libs     netsnmp specific agent libraries"
+  echo ""
+  echo "    --netsnmp-libs        netsnmp specific libraries (with path)"
+  echo "    --netsnmp-agent-libs  netsnmp specific agent libraries (with path)"
+  echo ""
+  echo "    --ldflags             link flags for external libraries"
+  echo "    --external-libs       external libraries needed by netsnmp libs"
+  echo "    --external-agent-libs external libraries needed by netsnmp agent libs"
+  echo ""
+  echo "  These options produce various link flags used when linking an"
+  echo "  external application against an uninstalled build directory."
+  echo ""
+  echo "    --build-includes      include path to build/source includes"
+  echo "    --build-lib-dirs      link path to libraries"
+  echo "    --build-lib-deps      path to libraries for dependency target"
+  echo "    --build-command       command to compile \$3... to \$2"
+  echo ""
+  echo "  Automated subagent building (produces an OUTPUTNAME binary file):"
+  echo "  [this feature has not been tested very well yet.  use at your risk.]"
+  echo ""
+  echo "    --compile-subagent OUTPUTNAME [--norm] [--cflags flags]"
+  echo "                                  [--ldflags flags] mibmodule1.c [...]]"
+  echo ""
+  echo "         --norm           leave the generated .c file around to read."
+  echo "         --cflags flags   extra cflags to use (e.g. -I...)."
+  echo "         --ldflags flags  extra ld flags to use (e.g. -L... -l...)."
+  echo ""
+  echo "  Details on how the net-snmp package was compiled:"
+  echo ""
+  echo "    --configure-options   display original configure arguments"
+  echo "    --prefix              display the installation prefix"
+  echo "    --snmpd-module-list   display the modules compiled into the agent"
+  echo "    --default-mibs        display default list of MIBs"
+  echo "    --default-mibdirs     display default list of MIB directories"
+  echo "    --snmpconfpath        display default SNMPCONFPATH"
+  echo "    --persistent-directory display default persistent directory"
+  echo "    --perlprog            display path to perl for the perl modules"
+  echo ""
+  exit
+fi  

bin/netmsg

@@ -0,0 +1 @@
+busybox

bin/netstat

@@ -0,0 +1 @@
+busybox

bin/nice

@@ -0,0 +1 @@
+busybox

bin/pidof

@@ -0,0 +1 @@
+busybox

bin/ping

@@ -0,0 +1 @@
+busybox

bin/ping6

@@ -0,0 +1 @@
+busybox

bin/ps

@@ -0,0 +1 @@
+busybox

bin/pwd

@@ -0,0 +1 @@
+busybox

bin/rm

@@ -0,0 +1 @@
+busybox

bin/rmdir

@@ -0,0 +1 @@
+busybox

bin/run-parts

@@ -0,0 +1 @@
+busybox

bin/sed

@@ -0,0 +1 @@
+busybox

bin/sh

@@ -0,0 +1 @@
+busybox

bin/sleep

@@ -0,0 +1 @@
+busybox

bin/stat

@@ -0,0 +1 @@
+busybox

bin/sync

@@ -0,0 +1 @@
+busybox

bin/tar

@@ -0,0 +1 @@
+busybox

bin/touch

@@ -0,0 +1 @@
+busybox

bin/true

@@ -0,0 +1 @@
+busybox

bin/umount

@@ -0,0 +1 @@
+busybox

bin/uname

@@ -0,0 +1 @@
+busybox

bin/usleep

@@ -0,0 +1 @@
+busybox

bin/vi

@@ -0,0 +1 @@
+busybox

bin/zcat

@@ -0,0 +1 @@
+busybox

etc/TZ

@@ -0,0 +1 @@
+/tmp/TZ

etc/acfg_common.conf

@@ -0,0 +1,2 @@
+hostapd_ctrl_iface_dir=/var/run/hostapd/
+wpa_supp_ctrl_iface_dir=/var/run/wpa_supplicant/

etc/athx100.conf

@@ -0,0 +1,11 @@
+ap_scan=1
+ctrl_interface=/var/run/wpa_supplicant
+wps_cred_processing=1
+network={
+        ssid="Atheros XSpan Network"
+        scan_ssid=1
+        proto=WPA
+        pairwise=TKIP
+        key_mgmt=WPA-PSK
+        psk="12345678"
+}

etc/avahi/avahi-autoipd.action

@@ -0,0 +1,66 @@
+#!/bin/sh
+
+# This file is part of avahi.
+#
+# avahi is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2 of the
+# License, or (at your option) any later version.
+#
+# avahi is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with avahi; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+set -e
+
+# Command line arguments:
+#   $1 event that happened:
+#          BIND:     Successfully claimed address
+#          CONFLICT: An IP address conflict happened
+#          UNBIND:   The IP address is no longer needed
+#          STOP:     The daemon is terminating
+#   $2 interface name
+#   $3 IP adddress
+
+PATH="$PATH:/usr/bin:/usr/sbin:/bin:/sbin"
+
+# Use a different metric for each interface, so that we can set
+# identical routes to multiple interfaces.
+
+METRIC=$((1000 + `cat "/sys/class/net/$2/ifindex" 2>/dev/null || echo 0`))
+
+if [ -n "$(type -q ip)" ] ; then
+
+    # We have the Linux ip tool from the iproute package
+
+    case "$1" in
+        BIND)
+            ip addr add "$3"/16 brd 169.254.255.255 scope link dev "$2"
+            ip route add default dev "$2" metric "$METRIC" scope link ||:
+            ;;
+
+        CONFLICT|UNBIND|STOP)
+            ip route del default dev "$2" metric "$METRIC" scope link ||:
+            ip addr del "$3"/16 brd 169.254.255.255 scope link dev "$2"
+            ;;
+
+        *)
+            echo "Unknown event $1" >&2
+            exit 1
+            ;;
+    esac
+
+else
+
+    echo "No network configuration tool found." >&2
+    exit 1
+
+fi
+
+exit 0

etc/avahi/avahi-daemon.conf

@@ -0,0 +1,28 @@
+[server]
+#host-name=foo
+#domain-name=local
+use-ipv4=yes
+use-ipv6=yes
+check-response-ttl=no
+use-iff-running=no
+
+[publish]
+publish-addresses=yes
+publish-hinfo=yes
+publish-workstation=no
+publish-domain=yes
+#publish-dns-servers=192.168.1.1
+#publish-resolv-conf-dns-servers=yes
+
+[reflector]
+enable-reflector=no
+reflect-ipv=no
+
+[rlimits]
+#rlimit-as=
+rlimit-core=0
+rlimit-data=4194304
+rlimit-fsize=0
+rlimit-nofile=30
+rlimit-stack=4194304
+rlimit-nproc=3

etc/avahi/services/http.service

@@ -0,0 +1,11 @@
+<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
+<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
+<service-group>
+ <name>...</name>
+  <service>
+   <type>_http._tcp</type>
+   <port>80</port>
+   <txt-record>path=/</txt-record>
+   <txt-record>vendorUrl=...</txt-record>
+  </service>
+</service-group>

etc/avahi/services/https.service

@@ -0,0 +1,11 @@
+<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
+<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
+<service-group>
+ <name>...</name>
+  <service>
+   <type>_https._tcp</type>
+   <port>443</port>
+   <txt-record>path=/</txt-record>
+   <txt-record>vendorUrl=...</txt-record>
+  </service>
+</service-group>

etc/banner

@@ -0,0 +1,7 @@
+      _      _
+   __| | ___| | ___  ___
+  / _` |/ _ \ |/ _ \/ __|  (c) 2019 devolo AG
+ | (_| |  __/ | (_) \__ \  powered by OpenWrt 15.05.1
+  \__,_|\___|_|\___/|___/  powered by QSDK SPF 6.1
+-----------------------------------------------------
+delos 5.2.1 for ___VENDOR_NAME___ ___PRODUCT_NAME___

etc/banner.failsafe

@@ -0,0 +1,13 @@
+================= FAILSAFE MODE active ================
+special commands:
+* firstboot	     reset settings to factory defaults
+* mount_root	 mount root-partition with config files
+
+after mount_root:
+* passwd			 change root's password
+* /etc/config		    directory with config files
+
+for more help see:
+http://wiki.openwrt.org/doc/howto/generic.failsafe
+=======================================================
+

etc/config/acd

@@ -0,0 +1,12 @@
+config default 'config'
+	option AutoConfigEnable '0'
+	option HCSecsBetweenDHCPRequestPackets '2'
+	option HRSecsBetweenDHCPRequestPackets '3'
+	option HRSecsBetweenStateContinuityCheck '15'
+	option HRMaxTriesWaitingForDHCPResponse '3'
+	option HCMaxTxTriesBeforeGettingIPAddr '10'
+	option SecsBetweenChecksForCableConnection '5'
+	option AcdDebugLevel '1'
+	option DisableHCMode '1'
+	option DisableWDSSTAInHREMode '0'
+

etc/config/avahi

@@ -0,0 +1,2 @@
+config avahi config
+	option disabled '0'

etc/config/configsync

@@ -0,0 +1,8 @@
+config configsync 'global'
+       option enabled    '1'
+       option logging    '0'
+       option startdelay '0'
+       option extensiondelay '20'
+       option eventdelay '10'
+       option configured '0'
+

etc/config/customization

@@ -0,0 +1,6 @@
+config config 'config'
+    option active_variant ''
+
+config info 'info'
+    option vendor_name ''
+    option product_name ''

etc/config/dlanApp2Backend

@@ -0,0 +1,6 @@
+config dlanApp2Backend 'global'
+       option enabled         '1'
+       option http_realm      'devolo-api'
+       option http_username   'devolo'
+       option http_password   ''
+       option http_ha1        ''

etc/config/dropbear

@@ -0,0 +1,5 @@
+config dropbear
+	option PasswordAuth 'on'
+	option RootPasswordAuth 'on'
+	option Port         '22'
+#	option BannerFile   '/etc/banner'

etc/config/easycwmp

@@ -0,0 +1,37 @@
+# easycwmp uci configuration
+
+config local
+	option disabled '0'
+	option interface lo
+	option port 7547
+	option ubus_socket /var/run/ubus.sock
+	option date_format %FT%T%z
+	option username easycwmp
+	option password easycwmp
+	option provisioning_code ''
+#basic authentication = 'Basic', Digest authentication = 'Digest', Default value = 'Digest'
+	option authentication 'Digest'
+#Logging levels: Critic=0, Warning=1, Notice=2, Info=3, Debug=4
+	option logging_level '1'
+
+config acs
+	option url 'https://bs-acs-dev.devolo.net:17457'
+	option username 'bs-acs-dev-client'
+	option password '9f5b6e971d0bc8bf219e994c1529112f'
+	option parameter_key ''
+	option periodic_enable '1'
+	option periodic_interval '300'
+	option periodic_time '0001-01-01T00:00:00Z'
+
+config device
+	option manufacturer easycwmp
+	option oui FFFFFF
+	option product_class easycwmp
+	option serial_number FFFFFF123456
+	option hardware_version example_hw_version
+	option software_version example_sw_version
+
+config instances 'instances'
+
+config next_instances 'next_instances'
+

etc/config/firewall

@@ -0,0 +1,196 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+	option disabled	0
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+
+config rule
+	option name		Allow-IGMP
+	option src		wan
+	option proto		igmp
+	option family		ipv4
+	option target		ACCEPT
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+
+config rule
+	option name		Allow-MLD
+	option src		wan
+	option proto		icmp
+	option src_ip		fe80::/10
+	list icmp_type		'130/0'
+	list icmp_type		'131/0'
+	list icmp_type		'132/0'
+	list icmp_type		'143/0'
+	option family		ipv6
+	option target		ACCEPT
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto	icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+
+
+### EXAMPLE CONFIG SECTIONS
+# do not allow a specific ip to access wan
+#config rule
+#	option src		lan
+#	option src_ip	192.168.45.2
+#	option dest		wan
+#	option proto	tcp
+#	option target	REJECT
+
+# block a specific mac on wan
+#config rule
+#	option dest		wan
+#	option src_mac	00:11:22:33:44:66
+#	option target	REJECT
+
+# block incoming ICMP traffic on a zone
+#config rule
+#	option src		lan
+#	option proto	ICMP
+#	option target	DROP
+
+# port redirect port coming in on wan to lan
+#config redirect
+#	option src			wan
+#	option src_dport	80
+#	option dest			lan
+#	option dest_ip		192.168.16.235
+#	option dest_port	80
+#	option proto		tcp
+
+# port redirect of remapped ssh port (22001) on wan
+#config redirect
+#	option src		wan
+#	option src_dport	22001
+#	option dest		lan
+#	option dest_port	22
+#	option proto		tcp
+
+# allow IPsec/ESP and ISAKMP passthrough
+config rule
+	option src		wan
+	option dest		lan
+	option proto		esp
+	option target		ACCEPT
+
+config rule
+	option src		wan
+	option dest		lan
+	option dest_port	500
+	option proto		udp
+	option target		ACCEPT
+
+### FULL CONFIG SECTIONS
+#config rule
+#	option src		lan
+#	option src_ip	192.168.45.2
+#	option src_mac	00:11:22:33:44:55
+#	option src_port	80
+#	option dest		wan
+#	option dest_ip	194.25.2.129
+#	option dest_port	120
+#	option proto	tcp
+#	option target	REJECT
+
+#config redirect
+#	option src		lan
+#	option src_ip	192.168.45.2
+#	option src_mac	00:11:22:33:44:55
+#	option src_port		1024
+#	option src_dport	80
+#	option dest_ip	194.25.2.129
+#	option dest_port	120
+#	option proto	tcp

etc/config/fwknopd

@@ -0,0 +1,17 @@
+config global
+	option uci_enabled '1'
+
+config network
+
+config access
+	option SOURCE 'ANY'
+	option REQUIRE_SOURCE_ADDRESS 'N'
+	option FW_ACCESS_TIMEOUT '300'
+	option CMD_CYCLE_OPEN  '/usr/share/delos-fwknopd/cmd.sh open $PORT'
+	option CMD_CYCLE_CLOSE '/usr/share/delos-fwknopd/cmd.sh close $PORT'
+	option CMD_CYCLE_TIMER '10'
+
+config config
+	option PCAP_INTF 'br-lan'
+	option ENABLE_SPA_PACKET_AGING N
+

etc/config/hyd

@@ -0,0 +1,164 @@
+config config 'config'
+	option Enable 				'0'
+	option cfg80211_enable 			'0'
+	option SwitchInterface			'auto'
+	option SwitchLanVid			'1'
+	option Control				'manual'
+	option DisableSteering			'0'
+
+config hy 'hy'
+	option LoadBalancingSeamless 		'1'
+	option ConstrainTCPMedium 		'0'
+	option MaxLBReordTimeout 		'1500'
+	option HActiveMaxAge			'120000'
+	option ForwardingMode			'APS'
+
+config Wlan 'Wlan'
+	option WlanCheckFreqInterval '10'
+	option WlanALDNLNumOverride  '0'
+
+config Vlanid
+	option ifname 'eth1'
+	option vid '1'
+
+config Vlanid
+	option ifname 'eth0'
+	option vid '2'
+
+config PathChWlan 'PathChWlan'
+	option UpdatedStatsInterval_W2 '1'
+	option StatsAgedOutInterval_W2 '30'
+	option MaxMediumUtilization_W2 '70'
+	option MediumChangeThreshold_W2 '10'
+	option LinkChangeThreshold_W2 '10'
+	option MaxMediumUtilizationForLC_W2 '70'
+	option CPULimitedTCPThroughput_W2 '0'
+	option CPULimitedUDPThroughput_W2 '0'
+	option PHYRateThresholdForMU_W2 '2000'
+	option ProbePacketInterval_W2 '1'
+	option ProbePacketSize_W2 '64'
+	option EnableProbe_W2 '1'
+	option AssocDetectionDelay_W2 '5'
+	option UpdatedStatsInterval_W5 '1'
+	option StatsAgedOutInterval_W5 '30'
+	option MaxMediumUtilization_W5 '70'
+	option MediumChangeThreshold_W5 '10'
+	option LinkChangeThreshold_W5 '10'
+	option MaxMediumUtilizationForLC_W5 '70'
+	option CPULimitedTCPThroughput_W5 '0'
+	option CPULimitedUDPThroughput_W5 '0'
+	option PHYRateThresholdForMU_W5 '2000'
+	option ProbePacketInterval_W5 '1'
+	option ProbePacketSize_W5 '64'
+	option EnableProbe_W5 '1'
+	option AssocDetectionDelay_W5 '5'
+	option ScalingFactorHighRate_W5 '750'
+	option ScalingFactorHighRate_W2 '200'
+	option ScalingFactorLow '60'
+	option ScalingFactorMedium '85'
+	option ScalingFactorHigh '60'
+	option ScalingFactorTCP '90'
+	option UseWHCAlgorithm '1'
+	option NumUpdatesUntilStatsValid '3'
+
+config PathChPlc 'PathChPlc'
+	option MaxMediumUtilization '80'
+	option MediumChangeThreshold '10'
+	option LinkChangeThreshold '10'
+	option StatsAgedOutInterval '60'
+	option UpdateStatsInterval '1'
+	option EntryExpirationInterval '120'
+	option MaxMediumUtilizationForLC '80'
+	option LCThresholdForUnreachable '5'
+	option LCThresholdForReachable '10'
+	option HostPLCInterfaceSpeed '0'
+
+config Topology 'Topology'
+	option ND_UPDATE_INTERVAL '15'
+	option BD_UPDATE_INTERVAL '3'
+	option HOLDING_TIME '190'
+	option TIMER_LOW_BOUND '7'
+	option TIMER_UPPER_BOUND '11'
+	option MSGID_DELTA '64'
+	option HA_AGING_INTERVAL '120'
+	option ENABLE_TD3 '1'
+	option ENABLE_BD_SPOOFING '1'
+	option NOTIFICATION_THROTTLING_WINDOW '1'
+	option PERIODIC_QUERY_INTERVAL '60'
+	option ENABLE_NOTIFICATION_UNICAST '0'
+
+config HSPECEst 'HSPECEst'
+	option UpdateHSPECInterval '1'
+	option NotificationThresholdLimit '10'
+	option NotificationThresholdPercentage '20'
+	option AlphaNumerator '3'
+	option AlphaDenominator '8'
+	option LocalFlowRateThreshold '2000000'
+	option LocalFlowRatioThreshold '5'
+	option MaxHActiveEntries '8192'
+
+config PathSelect 'PathSelect'
+	option UpdateHDInterval '10'
+	option LinkCapacityThreshold '20'
+	option UDPInterfaceOrder 'EP52'
+	option NonUDPInterfaceOrder 'EP52'
+	option SerialflowIterations '10'
+	option DeltaLCThreshold '10'
+	option EnableBadLinkStatsSwitchFlow '1'
+
+config LogSettings 'LogSettings'
+	option EnableLog '0'
+	option LogRestartIntervalSec '10'
+	option LogPCSummaryPeriodSec '0'
+	option LogServerIP '192.168.1.10'
+	option LogServerPort '5555'
+	option EnableLogPCW2 '1'
+	option EnableLogPCW5 '1'
+	option EnableLogPCP '1'
+	option EnableLogTD '1'
+	option EnableLogHE '1'
+	option EnableLogHETables '1'
+	option EnableLogPS '1'
+	option EnableLogPSTables '1'
+	option LogHEThreshold1 '200000'
+	option LogHEThreshold2 '10000000'
+
+config IEEE1905Settings 'IEEE1905Settings'
+	option StrictIEEE1905Mode '0'
+	option GenerateLLDP '1'
+	option AvoidDupRenew '0'
+	option AvoidDupTopologyNotification '0'
+
+config HCPSettings 'HCPSettings'
+	option V1Compat '1'
+
+config MultiAP 'MultiAP'
+	option EnableController '0'
+	option EnableAgent '0'
+	option EnableSigmaDUT '0'
+	option ClientAssocCtrlTimeoutSec '0'
+	option ClientAssocCtrlTimeoutUsec '200000'
+	option ShortBlacklistTimeSec '2'
+	option AlwaysClearBlacklists '1'
+	option ClientSteerTimeoutSec '1'
+	option ClientSteerTimeoutUsec '0'
+	option MetricsReportingInterval '5'
+	option RSSIHysteresis_W2 '5'
+	option RSSIHysteresis_W5 '5'
+	option LoadBalancingInterval '30'
+	option EnableChannelSelection '1'
+        option MinPreferredChannelIndex '36'
+        option MaxPreferredChannelIndex '99'
+
+config SteerMsg 'SteerMsg'
+	option AvgUtilReqTimeout '1'
+	option LoadBalancingCompleteTimeout '90'
+	option RspTimeout '2'
+
+config Monitor 'Monitor'
+    option DisableMonitoringLegacyClients '1'
+    option DisableSteeringInactiveLegacyClients '1'
+    option DisableSteeringActiveLegacyClients '1'
+    option DisableSteeringMax11kUnfriendlyClients '1'
+    option MonitorTimer '60'
+    option MonitorResponseTimeout '5'

etc/config/lbd

@@ -0,0 +1,148 @@
+config config 'config'
+	option Enable                           '1'
+	option cfg80211_enable                  '0'
+	list   MatchingSSID                     ''
+	option PHYBasedPrioritization           '0'
+	option BlacklistOtherESS                '0'
+	option InactDetectionFromTx             '0'
+
+config IdleSteer 'IdleSteer'
+	option RSSISteeringPoint_DG             '5'
+	option RSSISteeringPoint_UG             '20'
+	option NormalInactTimeout               '10'
+	option OverloadInactTimeout             '10'
+	option InactCheckInterval               '1'
+	option AuthAllow                        '0'
+
+config ActiveSteer 'ActiveSteer'
+	option TxRateXingThreshold_UG           '50000'
+	option RateRSSIXingThreshold_UG         '30'
+	option TxRateXingThreshold_DG           '6000'
+	option RateRSSIXingThreshold_DG         '0'
+
+config Offload 'Offload'
+	option MUAvgPeriod                      '60'
+	option MUOverloadThreshold_W2           '70'
+	option MUOverloadThreshold_W5           '70'
+	option MUSafetyThreshold_W2             '50'
+	option MUSafetyThreshold_W5             '60'
+	option OffloadingMinRSSI                '20'
+
+config IAS 'IAS'
+	option Enable_W2                        '1'
+	option Enable_W5                        '1'
+	option MaxPollutionTime                 '1200'
+	option UseBestEffort                    '0'
+
+config StaDB 'StaDB'
+	option IncludeOutOfNetwork              '1'
+	option TrackRemoteAssoc                 '1'
+	option MarkAdvClientAsDualBand          '0'
+
+config SteerExec 'SteerExec'
+	option SteeringProhibitTime             '300'
+	option BTMSteeringProhibitShortTime     '30'
+
+config APSteer 'APSteer'
+	option LowRSSIAPSteerThreshold_SIG      '17'
+	option LowRSSIAPSteerThreshold_CAP      '20'
+	option LowRSSIAPSteerThreshold_RE       '45'
+	option APSteerToRootMinRSSIIncThreshold '5'
+	option APSteerToLeafMinRSSIIncThreshold '10'
+	option APSteerToPeerMinRSSIIncThreshold '10'
+	option DownlinkRSSIThreshold_W5         '-65'
+	option APSteerMaxRetryCount		'2'
+
+config config 'config_Adv'
+	option AgeLimit                         '5'
+
+config StaDB 'StaDB_Adv'
+	option AgingSizeThreshold               '100'
+	option AgingFrequency                   '60'
+	option OutOfNetworkMaxAge               '300'
+	option InNetworkMaxAge                  '2592000'
+	option NumNonServingBSSes               '4'
+	option PopulateNonServingPHYInfo        '1'
+	option LegacyUpgradeAllowedCnt          '0'
+	option LegacyUpgradeMonitorDur          '2100'
+	option MinAssocAgeForStatsAssocUpdate   '150'
+
+config StaMonitor 'StaMonitor_Adv'
+	option RSSIMeasureSamples_W2            '5'
+	option RSSIMeasureSamples_W5            '5'
+
+config BandMonitor 'BandMonitor_Adv'
+	option ProbeCountThreshold              '1'
+	option MUCheckInterval_W2               '10'
+	option MUCheckInterval_W5               '10'
+	option MUReportPeriod                   '30'
+	option LoadBalancingAllowedMaxPeriod    '15'
+	option NumRemoteChannels                '3'
+
+config Estimator_Adv 'Estimator_Adv'
+	option RSSIDiff_EstW5FromW2             '-15'
+	option RSSIDiff_EstW2FromW5             '5'
+	option ProbeCountThreshold              '3'
+	option StatsSampleInterval              '1'
+	option Max11kUnfriendly                 '10'
+	option 11kProhibitTimeShort             '30'
+	option 11kProhibitTimeLong              '300'
+	option PhyRateScalingForAirtime         '50'
+	option EnableContinuousThroughput       '0'
+	option BcnrptActiveDuration             '50'
+	option BcnrptPassiveDuration            '200'
+	option FastPollutionDetectBufSize       '10'
+	option NormalPollutionDetectBufSize     '10'
+	option PollutionDetectThreshold         '60'
+	option PollutionClearThreshold          '40'
+	option InterferenceAgeLimit             '15'
+	option IASLowRSSIThreshold              '12'
+	option IASMaxRateFactor                 '88'
+	option IASMinDeltaBytes                 '2000'
+	option IASMinDeltaPackets               '10'
+	option ActDetectMinInterval             '30'
+	option ActDetectMinPktPerSec            '2'
+
+config SteerExec 'SteerExec_Adv'
+	option TSteering                        '15'
+	option InitialAuthRejCoalesceTime       '2'
+	option AuthRejMax                       '3'
+	option SteeringUnfriendlyTime           '600'
+	option MaxSteeringUnfriendly            '604800'
+	option TargetLowRSSIThreshold_W2        '5'
+	option TargetLowRSSIThreshold_W5        '15'
+	option BlacklistTime                    '900'
+	option BTMResponseTime                  '10'
+	option BTMAssociationTime               '6'
+	option BTMAlsoBlacklist                 '1'
+	option BTMUnfriendlyTime                '600'
+	option MaxBTMUnfriendly                 '86400'
+	option MaxBTMActiveUnfriendly           '604800'
+	option MinRSSIBestEffort                '12'
+	option LowRSSIXingThreshold             '10'
+	option StartInBTMActiveState            '0'
+	option Delay24GProbeRSSIThreshold       '35'
+	option Delay24GProbeTimeWindow          '0'
+	option Delay24GProbeMinReqCount         '0'
+	option LegacyUpgradeUnfriendlyTime      '21600'
+
+config SteerAlg_Adv 'SteerAlg_Adv'
+	option MinTxRateIncreaseThreshold       '53'
+	option MaxSteeringTargetCount           '1'
+	option ApplyEstimatedAirTimeOnSteering  '1'
+	option UsePathCapacityToSelectBSS       '1'
+
+config DiagLog 'DiagLog'
+	option EnableLog                        '0'
+	option LogServerIP                      '192.168.1.10'
+	option LogServerPort                    '7788'
+	option LogLevelWlanIF                   '2'
+	option LogLevelBandMon                  '2'
+	option LogLevelStaDB                    '2'
+	option LogLevelSteerExec                '2'
+	option LogLevelStaMon                   '2'
+	option LogLevelEstimator                '2'
+	option LogLevelDiagLog                  '2'
+
+config Persist 'Persist'
+	option PersistPeriod			'3600'

etc/config/parental_control

@@ -0,0 +1,3 @@
+config global
+        option logging '0'
+        option enabled '0'

etc/config/radius

@@ -0,0 +1,5 @@
+config radius
+        option profile_name 'default_profile'
+        option auth_port '1812'
+        option acct_port '1813'
+

etc/config/repacd

@@ -0,0 +1,237 @@
+config config repacd
+	option Enable                           '0'
+	option cfg80211_enable                  '0'
+	option ManagedNetwork                   'lan'
+	option DeviceType                       'RE'
+	option Role                             'NonCAP'
+	option GatewayConnectedMode             'AP'
+	option ConfigREMode                     'auto'
+	option DefaultREMode                    'son'
+	option BlockDFSChannels                 '0'
+	option EnableSteering                   '1'
+	option EnableSON                        '1'
+	option ManageMCSD                       '1'
+	option LinkCheckDelay                   '2'
+	option TrafficSeparationEnabled         '0'
+	option NetworkGuest                     'guest'
+	option NetworkGuestBackhaulInterface    '2.4G'
+	option EnableEthernetMonitoring         '0'
+
+config MAPConfig 'MAPConfig'
+	option Enable                           '0'
+	option FirstConfigRequired              '1'
+	option BSSInstantiationTemplate         'scheme-a.conf'
+	option FronthaulSSID                    ''
+	option FronthaulKey                     ''
+	option BackhaulSSID                     ''
+	option BackhaulKey                      ''
+	option BackhaulSuffix                   ''
+	option StandaloneController             '0'
+
+config WiFiLink 'WiFiLink'
+	option MinAssocCheckAutoMode            '5'
+	option MinAssocCheckPostWPS             '5'
+	option MinAssocCheckPostBSSIDConfig     '5'
+	option WPSTimeout                       '180'
+	option AssociationTimeout               '300'
+	option RSSINumMeasurements              '5'
+	option RSSIThresholdFar                 '-75'
+	option RSSIThresholdNear                '-60'
+	option RSSIThresholdMin                 '-75'
+	option RSSIThresholdPrefer2GBackhaul    '-100'
+	option 2GBackhaulSwitchDownTime         '10'
+	option MaxMeasuringStateAttempts        '3'
+	option DaisyChain                       '1'
+	option RateNumMeasurements              '30'
+	option RateThresholdMin5GInPercent      '40'
+	option RateThresholdMax5GInPercent      '70'
+	option RateThresholdPrefer2GBackhaulInPercent '5'
+	option 5GBackhaulBadlinkTimeout         '60'
+	option BSSIDAssociationTimeout          '90'
+	option RateScalingFactor                '70'
+	option 5GBackhaulEvalTimeShort          '1800'
+	option 5GBackhaulEvalTimeLong           '7200'
+	option 2GBackhaulEvalTime               '1800'
+	option PreferCAPSNRThreshold5G          '0'
+	option MoveFromCAPSNRHysteresis5G       '2'
+	option 2GIndependentChannelSelectionEnable '0'
+	option 2GIndependentChannelSelectionRssiLevel '-70'
+	option 2GIndependentChannelSelectionTotalRssiCounter '10'
+	option 2GIndependentChannelSelectionRssiDebug '0'
+	option 2GIndependentChannelSelectionStartRssiCheckTime '60'
+	option ManageVAPInd                     '0'
+
+config MAPWiFiLink 'MAPWiFiLink'
+	option MinAssocCheckPostWPS             '5'
+	option WPSTimeout                       '180'
+	option AssociationTimeout               '300'
+	option RSSINumMeasurements              '5'
+	option BackhaulRSSIThreshold_2          '-78'
+	option BackhaulRSSIThreshold_5          '-78'
+	option BackhaulRSSIThreshold_offset     '10'
+	option Max5gAttempts                    '3'
+	option MaxMeasuringStateAttempts        '3'
+	option ForceBSSesDownOnAllBSTASwitches  '0'
+
+config PLCLink 'PLCLink'
+	option PLCBackhaulEvalTime              '1800'
+
+config BackhaulMgr 'BackhaulMgr'
+	option SelectOneBackHaulInterfaceInDaisy '0'
+	option BackHaulMgrRateNumMeasurements   '10'
+	option PLCLinkThresholdto2G             '60'
+	option SwitchInterfaceAfterCAPPingTimeouts '10'
+
+config FrontHaulMgr 'FrontHaulMgr'
+	option ManageFrontAndBackHaulsIndependently '0'
+	option FrontHaulMgrTimeout              '300'
+
+config LEDState 'Reset'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '0'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'NotAssociated'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '500'
+	option DelayOff_1                       '500'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'AutoConfigInProgress'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '250'
+	option DelayOff_1                       '250'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'Measuring'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '250'
+	option DelayOff_1                       '250'
+	option Name_2                           'led_1'
+	option Trigger_2                        'timer'
+	option Brightness_2                     '1'
+	option DelayOn_2                        '250'
+	option DelayOff_2                       '250'
+
+config LEDState 'WPSTimeout'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '2000'
+	option DelayOff_1                       '1000'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'AssocTimeout'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '5000'
+	option DelayOff_1                       '1000'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'RE_MoveCloser'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'RE_MoveFarther'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '0'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'RE_LocationSuitable'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'InCAPMode'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'CL_LinkSufficient'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'CL_LinkInadequate'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '0'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'CL_ActingAsRE'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'RE_BackhaulGood'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'RE_BackhaulFair'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '1'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'
+
+config LEDState 'RE_BackhaulPoor'
+	option Name_1                           'led_0'
+	option Trigger_1                        'none'
+	option Brightness_1                     '0'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '1'
+
+config LEDState 'RE_SwitchingBSTA'
+	option Name_1                           'led_0'
+	option Trigger_1                        'timer'
+	option Brightness_1                     '1'
+	option DelayOn_1                        '250'
+	option DelayOff_1                       '250'
+	option Name_2                           'led_1'
+	option Trigger_2                        'none'
+	option Brightness_2                     '0'

etc/config/rpcd

@@ -0,0 +1,7 @@
+
+config login
+	option username 'root'
+	option password '$p$root'
+	list read '*'
+	list write '*'
+

etc/config/snmpd

@@ -0,0 +1,51 @@
+config agent
+        option agentaddress 'UDP:161'
+        option disabled '1'
+
+config com2sec 'public'
+        option secname 'ro'
+        option community 'public'
+        option source 'default'
+
+config group 'public_v1'
+        option group 'public'
+        option version 'v1'
+        option secname 'ro'
+
+config group 'public_v2c'
+        option group 'public'
+        option version 'v2c'
+        option secname 'ro'
+
+config group 'public_usm'
+        option group 'public'
+        option version 'usm'
+        option secname 'ro'
+
+config view 'all'
+        option viewname 'all'
+        option type 'included'
+        option oid '.1'
+
+config access 'public_access'
+        option group 'public'
+        option context 'none'
+        option version 'any'
+        option prefix 'exact'
+        option read 'all'
+        option write 'none'
+        option notify 'none'
+        option level 'noauth'
+
+config userv3
+        option access 'ro'
+        option authtype 'MD5'
+        option sectype 'DES'
+        option name ''
+        option authpass ''
+        option secpass ''
+
+config system
+	option sysLocation	''
+	option sysContact	''
+	option sysName		'devolo-business'

etc/config/ssid-steering

@@ -0,0 +1,4 @@
+config ssid-steering global
+	option enable		'0'
+	option private_vaps	'ath0'
+	option public_vaps	'ath1'

etc/config/station_quota

@@ -0,0 +1,3 @@
+config global 'global'
+	option logging '0'
+	option enabled '0'

etc/config/system

@@ -0,0 +1,12 @@
+config system
+	option hostname	OpenWrt
+	option timezone	UTC
+	option log_size	64
+
+config timeserver ntp
+	list server	0.openwrt.pool.ntp.org
+	list server	1.openwrt.pool.ntp.org
+	list server	2.openwrt.pool.ntp.org
+	list server	3.openwrt.pool.ntp.org
+	option enabled 1
+	option enable_server 0

etc/config/tr069_stun

@@ -0,0 +1,11 @@
+config stun 'stun'
+	option username 'tr069_stun'
+	option password 'tr069_stun'
+	option server_address 'stun.l.google.com'
+	option server_port '19302'
+	option min_keepalive '30'
+	option max_keepalive '3600'
+#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
+	option loglevel '0'
+#	option client_port 7547
+#if client_port option is not set or < 0 then use a random port for connection request source port 

etc/config/tr069_upnp

@@ -0,0 +1,12 @@
+config upnp 'upnp'
+	option enable '1'
+	option period '60'
+
+	option root_description_url ''
+#example of root_description_url: 'http://192.168.1.1:5000/rootDesc.xml'. Empty value means that will be discovered automatically.
+
+	option loglevel '0'
+#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
+
+config gateway 'gateway'
+

etc/config/uhttpd

@@ -0,0 +1,122 @@
+# Server configuration
+config uhttpd main
+
+	# HTTP listen addresses, multiple allowed
+	list listen_http	0.0.0.0:80
+	list listen_http	[::]:80
+
+	# HTTPS listen addresses, multiple allowed
+	list listen_https	0.0.0.0:443
+	list listen_https	[::]:443
+
+	# Redirect HTTP requests to HTTPS if possible
+	option redirect_https	0
+
+	# Server document root
+	option home		/www
+
+	# Reject requests from RFC1918 IP addresses
+	# directed to the servers public IP(s).
+	# This is a DNS rebinding countermeasure.
+	option rfc1918_filter 0 
+
+	# Maximum number of concurrent requests.
+	# If this number is exceeded, further requests are
+	# queued until the number of running requests drops
+	# below the limit again.
+	option max_requests 3
+
+	# Maximum number of concurrent connections.
+	# If this number is exceeded, further TCP connection
+	# attempts are queued until the number of active
+	# connections drops below the limit again.
+	option max_connections 100
+
+	# Certificate and private key for HTTPS.
+	# If no listen_https addresses are given,
+	# the key options are ignored.
+	option cert		/etc/uhttpd.crt
+	option key		/etc/uhttpd.key
+
+	# CGI url prefix, will be searched in docroot.
+	# Default is /cgi-bin
+	option cgi_prefix	/cgi-bin
+
+	# List of extension->interpreter mappings.
+	# Files with an associated interpreter can
+	# be called outside of the CGI prefix and do
+	# not need to be executable.
+#	list interpreter	".php=/usr/bin/php-cgi"
+#	list interpreter	".cgi=/usr/bin/perl"
+
+	# Lua url prefix and handler script.
+	# Lua support is disabled if no prefix given.
+#	option lua_prefix	/luci
+#	option lua_handler	/usr/lib/lua/luci/sgi/uhttpd.lua
+
+	# Specify the ubus-rpc prefix and socket path.
+#	option ubus_prefix	/ubus
+#	option ubus_socket	/var/run/ubus.sock
+
+	# CGI/Lua timeout, if the called script does not
+	# write data within the given amount of seconds,
+	# the server will terminate the request with
+	# 504 Gateway Timeout response.
+	option script_timeout	60
+
+	# Network timeout, if the current connection is
+	# blocked for the specified amount of seconds,
+	# the server will terminate the associated
+	# request process.
+	option network_timeout	30
+
+	# HTTP Keep-Alive, specifies the timeout for persistent
+	# HTTP/1.1 connections. Setting this to 0 will disable
+	# persistent HTTP connections.
+	option http_keepalive	20
+
+	# TCP Keep-Alive, send periodic keep-alive probes
+	# over established connections to detect dead peers.
+	# The value is given in seconds to specify the
+	# interval between subsequent probes.
+	# Setting this to 0 will disable TCP keep-alive.
+	option tcp_keepalive	1
+
+	# Basic auth realm, defaults to local hostname
+#	option realm	OpenWrt
+
+	# Configuration file in busybox httpd format
+#	option config	/etc/httpd.conf
+
+	# Do not follow symlinks that point outside of the
+	# home directory.
+#	option no_symlinks	0
+
+	# Do not produce directory listings but send 403
+	# instead if a client requests an url pointing to
+	# a directory without any index file.
+#	option no_dirlists	0
+
+	# Do not authenticate any ubus-rpc requests against
+	# the ubus session/access procedure.
+	# This is dangerous and should be always left off
+	# except for development and debug purposes!
+#	option no_ubusauth	0
+
+
+# Certificate defaults for px5g key generator
+config cert px5g
+
+	# Validity time
+	option days		3650
+
+	# RSA key size
+	option bits		2048
+
+	# Location
+	option country		ZZ
+	option state		Somewhere
+	option location		Unknown
+
+	# Common name
+	option commonname	'devolo AG'	

etc/config/upnpd

@@ -0,0 +1,18 @@
+config upnpd config
+	option enable_natpmp	1
+	option enable_upnp	1
+	option secure_mode	1
+	
+config perm_rule
+	option action		allow
+	option ext_ports	1024-65535
+	option int_addr		0.0.0.0/0	# Does not override secure_mode
+	option int_ports	1024-65535
+	option comment		"Allow high ports"
+
+config perm_rule
+       option action		deny
+       option ext_ports		0-65535
+       option int_addr		0.0.0.0/0
+       option int_ports		0-65535
+       option comment		"Default deny"

etc/config/wifi_schedule

@@ -0,0 +1,7 @@
+config global
+        option logging '0'
+        option enabled '0'
+        option forcewifidown '0'
+        option recheck_interval '10'
+        option modules_retries '10'
+	option unload_modules '0'

etc/config/wireless

@@ -0,0 +1 @@
+config delos_uninitialized 'delos_uninitialized'

etc/config/wsplcd

@@ -0,0 +1,49 @@
+config wsplcd config
+	option HyFiSecurity '0'
+	option cfg80211_enable '0'
+	# RunMode REGISTRAR, ENROLLEE, NONE or AUTO
+	option RunMode 'AUTO'
+	option DesignatedPBAP '0'
+	# WPSMethod WPS_M2 or WPS_M8
+	option WPSMethod 'WPS_M2'
+	option ConfigSta '1'
+	option SearchTimeout '60'
+	option WPSSessionTimeout '120'
+	option WPSRetransmitTimeout '5'
+	option WPSPerMessageTimeout '15'
+	option PushButtonTimeout '120'
+	option PBSearchTimeout '10'
+	option SSIDSuffix ''
+	option NetworkKey1905 ''
+	option UCPKSalt ''
+	# WPAPassphraseType LONG or SHORT
+	option WPAPassphraseType 'LONG'
+	# DebugLevel DUMP,DEBUG,INFO,ERROR
+	option DebugLevel 'ERROR'
+	option BandSel '0'
+	option BandChoice '5G'
+	option RMCollectTimeout '10'
+	option DeepClone '1'
+	option DeepCloneNoBSSID '0'
+	option ManageVAPInd '1'
+
+	# Following are configuration for 1.0 AP Cloning
+	option APCloning '0'
+	# ButtonMode ONEBUTTON or TWOBUTTON
+	option ButtonMode 'TWOBUTTON'
+	option CloneTimeout '180'
+	option WalkTimeout '120'
+	option RepeatTimeout '1'
+	option InternalTimeout '15'
+
+	option WaitOtherBandsSecs '20'
+	option WaitFirstBandSecs  '30'
+	# Write debug log to file: NONE, APPEND, TRUNCATE
+	option WriteDebugLogToFile 'NONE'
+
+	# Config push restart and apply timeouts in secs
+	# Applicable to Registrar
+	option ConfigRestartShortTimeout '5'
+	# Applicable to Enrollee only
+	option ConfigRestartLongTimeout '15'
+	option ConfigApplyTimeout '30'

etc/config/xmpp

@@ -0,0 +1,13 @@
+config xmpp 'xmpp_client'
+	option username 'username'
+	option password 'pass'
+	option domain 'domain'
+	option resource 'resource'
+	option keep_alive_interval '40'
+	option connect_attempt '4'
+	option retry_init_interval '5'
+	option retry_interval_multi '5'
+	option retry_interval_max '10'
+	option allowed_jid ''
+	option cafile ''
+	option verify_peer '0'

etc/delos-image

@@ -0,0 +1 @@
+DEVICE_TYPE=1200wifiac